202 206 222A 620 626 630 720 1255 8112 D420 D2112 and D2212 with D202A keypad D2112 and D2212 with D223 keypad D4112 with D420 and D620 keypad D6412, D4412 and D3412 with LED keypad D7212 D7412 D6112 and D4112 with D636 LED keypad Omega Alarm 4012-8012 Radionics 4012-8012 Radionics 4112 Radionics 9112 Radionics 9412. Read More.

• Caddx Nx8e Manual
• Caddx Security Command Center User Manual Free
• Caddx Alarm Manual
• Caddx Security Command Center User Manual Instructions
• Caddx Keypad Manual
• Caddx Security System
• Caddx 8980e User Manual

Alarm Systems

The GE Caddx Networx line of security systems offer many of the features of more complicated alarms, but at very reasonable prices. The 3 main panels are the GE NX-4, NX-6, and the NX-8. The smallest is the NX-4, with 8 on-board zones. The largest panel is the Caddx NX-8, with 8-zones on-board, expandable to 48. This range of zones will cover anything from an apartment or condo to a large house.

Update, June 2017: The Caddx NetworX series is evidently being discontinued.
Though I haven’t seen any official announcement from GE/Interlogix, I can find no listings for Caddx panels at 2 of the 3 suppliers I regularly visit online. The only supplier I saw still listing Caddx equipment has many fewer items, compared to years past.
If you’re considering installing a new Caddx NetworX system, scroll down to see my 'New to Caddx NetworX?' section, at the bottom of this page.
If you’re looking for information on Caddx NetworX systems in general, read on…

All three General Electric products Networx systems can handle a combination of hardwired and wireless zones, so they can easily be installed in new or existing construction. This installation flexibility, along with low cost, make a Caddx alarm panel a good choice for a DIY security system.

Caddx wireless transmitters are the standard NX-series sensors used by many other GE systems. Wireless sensors are available for doors and windows, motions, glassbreaks, smoke detectors, etc. Wireless keypads and keyfobs can also be added to allow easy arming, disarming, and other functions.

Need more than 48 zones? Check out the GE Concord 4 Security System.

If you want a mostly wireless system, see these pages:

GE Security Caddx NX-4

• 4-Hardwired zones on-board, expandable to 8-zones
• 4-Wire smoke loop
• 8-User codes

The NetworX-4 or NX-4 is one of the most basic of GE home security systems available. It’s a hybrid panel that features 4 programmable zones, expandable to a total of 8. Unlike the NX-6 and NX-8, the NX-4 doesn’t have any programmable outputs.

The Caddx NX-4 is often sold as a package, with everything needed to build a complete basic system. Its small size makes it a good fit for an apartment, condo, or townhouse-size home.

If you’re choosing a system for a not-so-small-to-medium size home, you may want to go with the NX-6 or even the NX-8 (below), rather than limit yourself with the NX-4. The slight additional cost for the larger Caddx alarms is offset with much more flexibility, if you ever decide to expand the system in the future.

GE Security Caddx NX-6

• 6 Hardwired zones on-board, expandable to16-zone maximum capacity (wireless)/ 12 zones hardwired
• 4 Programmable outputs
• 2-Wire and 4-wire smoke detector loop
• 40 User codes

The GE Caddx NX-6 builds upward from the NX-4, adding increased numbers of zones and user codes. It also offers a 2-wire smoke detector loop, which is much easier to work with for do-it-yourself home alarm installers. The increased zone capacity makes the Caddx NX-6 a good choice for a medium or slightly larger size home, depending on the number of doors and windows you need to protect.

GE Security Caddx NX-8

• 8 on-board zones, expandable to 48 zones maximum - hardwired and/or wireless
• 2-wire and 4-wire smoke detector loops
• 4 programmable outputs
• 99 user codes

The largest GE Caddx panel, the NX-8 gives you plenty of zone capacity for a large house (along with more codes than you’ll likely ever need!) It also features both 2- and 4-wire smoke detector loops, making the addition of fire protection easier.

Like the NX-6, this system offers 4 programmable outputs. These can be used to activate a relay or optional device in response to an alarm or other system event.

Programming GE Caddx Systems

The Caddx Networx panels can be programmed remotely, using Caddx remote software, or on-site using a keypad.

As with most keypad-programmable security panels, the Caddx alarm systems are easier to work with if you have an LCD display keypad. Although a standard LED keypad will work, it can be confusing trying to navigate the menus using only LED’s for feedback.

If you’re on a tight budget and/or are installing the system in a smaller home, an LED keypad will be fine. If you’re planning a system for a larger house with many points of protection to program, you’ll be much happier with an LCD unit like the NX-148E (hardwired) or the NX-148E-RF (wireless.)

Caddx Nx8e Manual

You can find links to GE Caddx NX-8 manuals on my alarm system manual sources page.

New to Caddx NetworX?

As I mentioned earlier, it appears that the GE Interlogix Caddx NetworX line of alarm panels is being discontinued. There are still listings for NX-4, NX-6, and NX-8 main panels from a few suppliers that I regularly check, others list them as “No Longer Available” or “Discontinued”.

Various accessories like keypads, zone expanders, relay modules, etc. are currently listed as available.

What does this mean to you? It depends on your situation:

Caddx Security Command Center User Manual Free

These older panels offer no features that you can’t get on most current systems, and lack most of the latest options people are buying. Also, if anything were to break on your Caddx system, you can’t count on being able to get replacement parts.

If you have an existing NX-4, -6, or-8 GE Caddx system in need of replacement parts?

Caddx Alarm Manual

You have to decide whether to spend the money to fix it, or simply replace the whole system. To help you decide, here is my opinion:

• If the system was in good working order previously, has all the features you need, and the keypads are fully functional and undamaged, then I would lean towards fixing the system. Chances are good that you’ll get at least another several years or more of use from the system. When it eventually does fail, you can worry about finding a new system then.
  
• If, on the other hand, your system has had multiple problems in the past, lacks features you want or need, or if any of the keypads are damaged or malfunctioning, I would replace the system rather than repair it.

Also, if you’ve been thinking about upgrading your NetworX system to something with modern features like smartphone control, video monitoring, or home automation capabilities, this might be a good time to make the switch.

Related Articles:

GE Concord 4 Security System
GE Security Simon XT
GE Simon 3 Alarm System

If you haven't done so already, get a few Free Home Security Systems Quotes from companies in your area.
This will give you a good idea of what it would cost to have a system installed, as well as how much you could save by doing it yourself.

Return to GE Home Security Systems from GE Caddx Alarm Systems

Return to Home-Security-Systems-Answers from GE Caddx Alarm Systems

Caddx Security Command Center User Manual Instructions

Caddx Keypad Manual

Caddx Security System

Caddx 8980e User Manual