Before contacting ION support, we recommend searching our product support Knowledge Base to see if a solution to your particular question has already been published. Manuals Our Manuals and Quick Start Guides provide comprehensive, easy-to-understand instructions on using your device.
5
Rear Panel
1.
Power Cable Input: Insert the included power cable here to
charge the unit. Note that the Job Rocker can run off the power
cable while it simultaneously charges the battery. The charge
indicator illuminates when the battery is charging.
2.
AC Power Outlet: Flip open the rubber plugs and connect your
devices here. The AC outlets work when wall power is connected.
3.
Fuse Cover: If the unit’s fuse is broken use a screwdriver or
other tool to lift this tab to replace the fuse. Replace it with a fuse
with an appropriate rating.
Fuse model and type: US Units: 250V, 750 mA; EU/UK Units:
250V, 500 mA. Using a fuse with an incorrect rating can damage
the unit and/or fuse.
4.
Power ON/OFF Switch: Turns Job Rocker on or off. Please note that while Job Rocker is connected to
a power source, it does not need to be powered on to charge the battery.
5.
Battery Level Indicator: While the unit is powered ON and unit is not plugged in, these four lights
indicate the power left in the battery. Battery life varies based on volume and usage.
Connecting with a Bluetooth Device
1.
Turn on Job Rocker using the power switch.
2.
Navigate to your Bluetooth device’s setup screen, find “ION Speaker” and connect.
3.
If your device requires a passcode or PIN, enter “0000”.
Note: The next time you approach Job Rocker with your Bluetooth device, it will automatically re-
connect.
4.
If your Bluetooth device is not able to connect to Job Rocker, press the Bluetooth Disconnect button on
Job Rocker to break previous Bluetooth connections and reset the Bluetooth module.
Note: Maximum range will be achieved when using devices with Bluetooth 4.0.
5.
Paired LED will light up solid when it is 'paired'.
6.
Start playback from your Bluetooth device.
7.
To connect to another Bluetooth device, press the Bluetooth Disconnect button. Repeat Step 2.
8.
To disconnect a connected Bluetooth device, press the Bluetooth Disconnect button.
Note: If you experience trouble connecting or playing music, update your device's OS.
Using the Radio
1.
Turn the radio on using the Radio Selectorswitch to select either AM or FM.
2.
Use the Tuner buttons to search for a radio station. To 'Seek' (jump to the next available station), hold
a Tuner button down for a few seconds until it starts to seek a station. Theunit will remember the last
station you were on and start at that station when you power off and power on again.
To add a preset:
A. Select either the AM or FM band and then use the Tuner buttons to select the desired radio station.
B. Press and hold a numeric Radio Preset button for a few seconds to assign the current station to
that preset number. To use an added preset, tap a Radio Preset number once lightly to go to the
stored radio station.
Using the Aux Input
Connect your iPod, iPod touch, iPhone, smartphone, MP3 player, or similar device to the Aux input. Adjust
the output volume on your source device and then adjust the overall volume using the Volume knob on Job
Rocker.
Troubleshooting
If the sound is distorted: Try lowering the volume control of your sound source or musical instrument. Also, try to
reduce the overall volume of Job Rocker.
If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass level. This
will allow you to play the music louder before clipping (distortion) occurs.
If there is poor AM reception: When you have a Bluetooth device that is connected, disconnect your Bluetooth
device in order to listen to AM radio. To adjust AM reception, move the entire unit.
If the AC Outlet is not working: Make sure Job Rocker is connected to wall power.
If Job Rocker is not charging: Make sure the fuse is not blown. If it is, replace the fuse with one of the same rating.
1
2
2
5
3
4
4
Diagram and Parts Description
1.
Instrument/ Microphone Input
with Volume Control (1/4'): This
mono input accepts a 1/4' input
such as a microphone, guitar, or
other musical instrument.
2.
Auxiliary input: This stereo 1/8”
input can be used to connect a
CD player, MP3 player, or other
audio source.
3.
Bluetooth:The Paired LED will
be lit when a device is paired to
BLOCK ROCKER BLUETOOTH.
This LED will not be lit when
BLOCK ROCKER BLUETOOTH
is first powered on (unless it was
previously paired with a device).
Press the Disconnect button to
disconnect a paired Bluetooth
device.
4.
Master Volume Control: This adjusts the speaker’s main mix volume,
which includes Instrument/Microphone Input, Auxiliary Input, Tuner, and
the audio of a paired Bluetooth device.
5.
Radio Selector: This switch sets the tuner to AM or FM or turns the tuner
off. (Note: This switch does not turn the unit's power off – just the tuner.)
6.
LCD: Displays the current radio station.
7.
Tuner: Use these buttons to search for a radio station. To 'seek' (jump to
the next available station), hold this down for a few seconds until it starts to
seek a station.
Unit will remember the last station you were on when you
power off and power back on.
8.
Power LED: Indicates whether BLOCK ROCKER BLUETOOTH is on or
off.
9.
USB Charge Ports: Connect your devices charge cables to these ports to
charge them. USB charging only functions when the unit’s power is turned
on.
10.
Device Cradle: Place your iPad/iPod touch®/iPhone®, Android or other device here to be held. These can be
connected via Bluetooth or to aux input using the included 1/8” to 1/8” cable.
Note: It is recommended to remove your iPad or other device from the cradle before transporting or traveling with
BLOCK ROCKER.
11.
NFC: Tap your NFC (near-field communication) supported and enabled device here to pair your phone by gently
bumping on the ‘N’ logo. See the section Pairing with a Device using NFC for more information.
12.
Antenna: Adjust this telescoping FM antenna to get the best radio reception.
Note:To prevent accidental damage, we recommend rotating the antenna only when it is extended horizontally. Also,
retract the antenna when the Tuner is not in use.
Note:
To adjust AM reception, move entire unit.
13.
Power Cable Input (IEC): Insert the included power cable here to charge the unit. Note that the BLOCK ROCKER
BLUETOOTH can run off the power adapter while it simultaneously charges the battery. The charge indicator illuminates
when the battery is charging.
14.
Voltage Selector*: If your unit has a voltage selector switch,
change its setting only when necessary (e.g., when traveling
to a country or region with a different voltage). Selecting an
improper voltage setting can damage the unit. To change its
setting, only remove *one* screw of the cover and slide it
aside to expose the selector.
15.
Power ON/OFF Switch: Turns BLOCK ROCKER
BLUETOOTH on or off. Please note that while BLOCK
ROCKER BLUETOOTH is connected to a power source, it
does not need to be powered on to charge the battery.
16.
Battery Level Indicator: While the unit is powered ON and
unit is not plugged in, these four lights indicate the power left
in the battery. Battery life varies based on volume and usage.
*WARNING: If your unit has a voltage
selector switch, change its setting only when
necessary (e.g., when traveling to a country
or region with a different voltage). Selecting
an improper voltage setting can damage the
unit. To change its setting, only remove *one*
screw of the cover and slide it aside to
expose the selector.
9
10
10
12
12
1
2
5
6
8
4
7
7
3
11
11
14
14
13
13
15
15
16
16